TURBO TWO COMPONENT EPOXY ADHESIVE

High performance 2 component epoxy adhesive.
•General purpose with open application - processing time, 5 minutes.
•Very fast and robust.
•Suitable for all combinations of materials (except PP, PE).
•For car repairs, handicrafts, industry, hobbies.
•Resistant to vibration, acids and moisture.
Application:

For high quality gluing, plastering, filling and sealing work.
Suitable for: all metals, aluminum, wood, hard synthetic materials, porcelain, stone, clay, terracotta, concrete, marble, ceramics, precious stones, glass, plexiglass, most plastics etc.
Ideal for connecting materials different from each other.
NOT RECOMMENDED for polyethylene (PE), polypropylene (PP), Teflon and silicone.

User Instructions:
Surfaces must be dry and clean, free of grease, oil and dust. You can achieve an ideal gluing by first sanding the surfaces.
Break the tip of the nose and put the required amount. Mix well with a spatula for about 1 minute.
Spread the glue on one surface, in a thin layer. On porous or rough materials, apply the glue to both surfaces and join them immediately.
Wipe the nose with a little paper and then close the glue with the special lid, which you have broken from the device, following the guide.
Precautions: The material irritates the eyes and skin. The use of goggles and gloves is recommended. Always follow the user instructions  of the manufacturer.

Cleaning:
BEFORE: With TURBO TOP-CLEAN or with common cleaners, such as alcohol, turpentine, White spirit, nitro solvent etc.
 AFTER:Excess material can be cleaned - fresh - with alcohol.